Our Location
ame>
SCHEDULE AN INSPECTION









Childrens Hospital Free Care Fund Sponsor

Steel I-Beam Solutions

What are Steel I-Beams?

I-beamsSteel I-beams are just that – “I”-shaped steel beams that come in a variety of sizes and shapes. A steel I-beam is a joist or girder made from steel. I-beams are used as major support trusses in building, to ensure that a structure will be sound. The beams are placed against the wall, then held in place by wood framing that attaches to the joists at the top, and either a bolt at the bottom that is driven into the floor or the floor is opened and the beam is attached to the footer. Matthews Wall Anchor & Waterproofing Service is your provider and installer for the Pittsburgh, Cleveland, and Columbus area.

What Are The Different Uses and Applications For Steel I-Beams

If you notice bowing or leaning walls in your basement, this can be cause for concern. Foundation settlement can be the cause of these bowing or leaning walls.  If you see signs of bowing or leaning walls, the sooner it’s looked at by a professional, the better. Matthews Wall Anchor & Waterproofing Service will inspect your foundation and give you the best solution to your foundation settlement problems.

Water pressure is one of the most common causes for bowing walls. In a cold climate, moisture freezes when it gets cold and then it will expand. If there is enough water in the ground, that freezing water puts pressure on the wall, causing it to crack or bow. Other reasons for bowing walls is improper drainage, lack of waterproofing, tree roots and aging of the structure. A bowed wall will get worse over time or deteriorate quicker since the wall has lost its integrity and resistance. A wall that is bowed has existing cracks and defects below the surface. Installing I-beams will get your walls back into place and prevent further bowing or cracking. Matthews Wall Anchor & Waterproofing Service is your I-beam expert.

case studiesbutton_financing-program

How are I-Beams Installed?

To install I-beams, the floor along the foundation walls are jackhammered where the beams will be placed. The beams are then installed and bolted to a wooden floor joist above. The pressure bearing against the wall is transferred to the wood floor joist.

Also, since the beams are rigid, they will only touch the wall at one point – where the foundation wall is bowed the most. If installed correctly, they will add back pressure to the wall, discouraging it from moving any further. One great reason to use a steel I-beam is that it is much less likely to warp and bend as other materials used, such as wood.

Matthews Wall Anchor & Waterproofing Service has served the Pennsylvania and Ohio area for over 30 years. Choosing the right foundation repair contractor is important. We have the experts and experience to help you with your foundation repair needs. We will meet with you to evaluate your property and give you a quote. We offer a 6 month same as cash financing program. Our number one goal is to help our customers. After you contact us, one of our repair specialists will schedule a visit with you and answer any questions you have regarding your foundation repair. Don’t let a cracked or bowed wall be ignored. The longer you wait to get it fixed, the more the damage that will be done to your foundation. Our I-beam installation can get your bowed walls straight and reinforce your structure.

There are many different sizes of steel I-beams based on the construction needs. Your Matthews Wall Anchor & Waterproofing Service installer can help assist you in determining your needs for your project. Please call 1-800-717-5377 for more information or visit our contact page for more options to reach us.